The Cactus Technologies 203 Series Industrial Grade Compact Flash Memory Card is a SLC NAND based solid-state flash memory device that complies with the CompactFlash Association ATA standard in the CF Type I form factor. It is available in capacities from 32MBytes to 2GBytes and intended for OEM applications needing a high endurance part with adequate performance or requiring the optional full extended temperature range of -45C to +90C.
The 203 Series Compact Flash comes with full BOM Control, Long Life Cycles and is built with Stringent Quality Processes. As with our other Industrial Grade products, Cactus Technologies incorporates Industrial Grade ECC, Wear Leveling, Write Abort Protection Circuitry and Defect Management into the 203 Series CF, making it the most reliable device available. Custom Labeling, Custom ID and Preloaded Content are available based on customer requirements (see Custom Features).
- 32MB - 2GB
- Memory type
- SLC NAND
- Endurance cycles
- >2 Million
- MTBF (Hours)
- 4 Million
- 5 Years
- Standard temperature
- 0°C to 70°C
- Extended temperature
- -45°C to 90°C
- Sequential read
- Sequential write
- Pro feature set
- SMART feature
- Similar Feature
- Industry Standard CF Type 1 Form Factor
- Card Capacities 32MB to 2GB
- Supports True IDE Mode
- Supports ATA PIO Mode 0-4
- Support Multiword DMA Mode 0-2
- Dual Voltage Support: 3.3V or 5.0V
- Unique Electronic Serial Card ID
- Supports Traceability Barcode
- Solid State Design With No Moving Part
- Fast Data Transfer Rates
- High Data Reliability
- High Shock & Vibration Tolerances
- Wide Operating Temperature Range
Cactus Part Numbers
The 203 Series CompactFlash matches the these part numbers. If you are interested in any of these part numbers, please Contact a Cactus Expert.
Cactus has a Compact Flash to PC Card adapter for applications using a Compact Flash card in the larger sized PC Card form factor slots.
The CF to PC Card adapter converts the 50-pin Compact Flash interface to the 68-pin PC Card (previously known as PCMCIA) standard. Once a CompactFlash card is in the adapter, it meets the form, fit and function of a PC Memory Card.
This adapter is meant to be used with Cactus Technologies Compact Flash cards and can be used with a CompactFlash card in volume production systems if required.
Please contact Cactus if you need specific details regarding this adapter.
To ease the access to the CompactFlash card signals during an OEM's design, Cactus created the CF Extender Card.
The CF Extender Card plugs into the standard CF slot and provides a slot for the CF card at the other end. On the PCB the signals are labeled so that they can be probed as necessary during development.
This is only meant for development of Cactus CF cards and is not available as a production product. Please contact Cactus if you need specific details regarding this adapter.