The Cactus Technologies High Performance 900S Series Industrial Grade mSATA, available in capacities up to 64 Gbytes, is a solid-state flash memory product that adheres to the JEDEC MO300B and SATA-IO groups specifications. It is intended for OEM applications needing a high performance, high endurance embedded part and/or requiring the optional full extended temperature range of -45C to +90C.
The High Performance Industrial Grade mSATA is SLC NAND based and comes with full BOM Control, Long Life Cycles and is built with Stringent Quality Processes. Cactus Technologies incorporates Industrial Grade ECC, Wear Leveling, Write Abort Protection Circuitry and Defect Management into the product making it the most reliable mSATA device available. Custom Labeling, Custom ID, Preloaded Content and custom firmware features are available based on customer requirements (see Custom Features).
- 4GB – 64GB
- Memory type
- SLC NAND
- Endurance cycles
- >2 Million
- MTBF (Hours)
- 4 Million
- 5 Years
- Standard temperature
- 0°C to 70°C
- Extended temperature
- -45°C to 90°C
- SATA bus speed
- 1.5Gb/s & 3.0Gb/s
- Sequential read
- Sequential write
- Pro feature set
- Contact Cactus
- SMART feature
- Industry Standard Serial ATA (SATA) mSATA
- Capacities 4GB to 64GB
- >2 Million Endurance Cycles per block
- Supports SATA I (1.5Gbits/sec) and SATA II (3.0Gbits/sec) transfer rates
- Sustained Read Speeds up to 110Mbytes/sec
- Sustained Write Speeds up to 90Mbytes/sec
- Locked BOM Control
- Supports Traceability Barcode
- Solid State Design With No Moving Part
- Long Life Cycles
- High Shock & Vibration Tolerances
- Wide Operating Temperature Range
- 4 Million Hour MTBF
Cactus Part Numbers
The 900S Series mSATA matches the these part numbers. If you are interested in any of these part numbers, please Contact a Cactus Expert.
To ease an OEM's design efforts of Cactus mSATA into their system, Cactus created the mSATA to 2.5" SATA Adapter.
The Adapter has a mSATA connector and mounting on the PCB and converts the signals to the standard 2.5" SATA connector found on most SSD. Many designers find it useful to use the final memory storage device even while developing on a different platform.
This is only meant for development of Cactus mSATA devices and is not available as a production product. Please contact Cactus if you need specific details regarding this adapter.