240 Series CompactFlash

The Cactus Technologies 240 Series Commercial Grade Compact Flash Memory Card is a 15nm MLC NAND based solid-state flash memory device that complies with the CompactFlash Association ATA standard in the CF Type I form factor. It is available in capacities from 4GBytes to 128GBytes and intended for OEM applications needing a cost effective part with very good performance.

The 240 Series Compact Flash comes with full BOM Control and is built with Stringent Quality Processes. Cactus Technologies incorporates World Class ECC, Wear Leveling and Defect Management into the 240 Series CF, making it a very reliable MLC based Compact Flash. Custom Labeling, Custom ID and Preloaded Content are available based on customer requirements (see Custom Features).

Specifications

Capacities
4GB - 128GB
Memory type
MLC NAND
Endurance cycles
100K
MTBF (Hours)
200K
Warranty
2 Years
Standard temperature
0°C to 70°C
Extended temperature
Contact Cactus
Sequential read
110MB/s
Sequential write
80MB/s
Shock/vibration
3000/30
UDMA
Up to Mode 6
SMART feature
Yes

Features

  • Industry Standard CF Type 1 Form Factor
  • Card Capacities 4GB to 128GB
  • SMART Feature Set
  • Supports True IDE Mode
  • Supports ATA PIO Mode 0-6
  • Support Multiword DMA Mode 0-4
  • Supports UDMA Mode 0-6
  • Dual Voltage Support: 3.3V or 5.0V
  • Unique Electronic Serial Card ID
  • Supports Traceability Barcode
  • Solid State Design With No Moving Parts
  • Fast Data Transfer Rates
  • High Data Reliability
  • High Shock & Vibration Tolerances

Cactus Part Numbers

The 240 Series CompactFlash matches the these part numbers. If you are interested in any of these part numbers, please Contact a Cactus Expert.

  • KC128GF-240
  • KC128GR-240
  • KC16GF-240
  • KC16GR-240
  • KC32GF-240
  • KC32GR-240
  • KC4GF-240
  • KC4GR-240
  • KC64GF-240
  • KC64GR-240
  • KC8GF-240
  • KC8GR-240

Compact Flash Extender Card for Development

To ease the access to the CompactFlash card signals during an OEM's design, Cactus created the CF Extender Card.

The CF Extender Card plugs into the standard CF slot and provides a slot for the CF card at the other end. On the PCB the signals are labeled so that they can be probed as necessary during development.

This is only meant for development of Cactus CF cards and is not available as a production product. Please contact Cactus if you need specific details regarding this adapter.